JUL 2020 Chapter 28 Fuel System Page 28.11D
28-23 Fuel Flow Meter Installation (continued)
F. Scheduled Maintenance
Every 12 Months:
Transducer
Visually inspect fuel control unit-to-transducer fuel tube connections, transducer,
and reducer connections to transducer and check valve for evidence of leakage.
Visually inspect components for any obvious damage; verify proper installation
and security. Verify no damaged connectors. Verify wiring neatness, proper
routing and installation, and security.
Adapter
Visually inspect adapter for any obvious damage; verify proper installation and
security. Inspect wiring for loose, chafed, frayed, or broken wires. Verify no damaged
connectors. Verify wiring neatness, proper routing and installation, and security.
G. Special Maintenance
Transducer and Adapter
Refer to configuration procedure per Part E. Determine K-factor printed on the
transducer; verify adapter is configured properly. Perform 100-Hour/Annual
inspection per Part F.
To Next Page
