Robinsons R66 - Fillers and Putty; Primers; Powder Coat; CHAPTER 18 - TRACK and BALANCE (Continued)

20-72 Solvents and Cleaners (continued)
PRODUCT MANUFACTURER/SUPPLIER APPLICATION
#112 Ammoniated or
#222 Nonammoniated cleaning
& rinse solution
L&R Mfg. Co.
Kearny, NJ
Ultrasonic cleaning, avionics
components only.
* May be used on acrylic plastic.
** Mix 5%-20% by volume; titration not required.
20-73 Fillers and Putty
PRODUCT MANUFACTURER/SUPPLIER APPLICATION
315 Putty & Blue Cream
Hardener
DuPont Chemical
Los Angeles, CA
Minor surface imperfections.
05960 Acryl - Green 3M
St. Paul, MN
“ “
SBF1191 Gearhead Products
Indianapolis, IN
“ “
20-74 Torque Seal
PRODUCT MANUFACTURER/SUPPLIER APPLICATION
F-900
(Any color except red)
Organic Products Co.
Irving, TX
Torque seal.
20-75 Primers
PRODUCT MANUFACTURER/SUPPLIER APPLICATION
Gray epoxy CA 7422A/B/C
or CA 7501A/B
PRC - Desoto Int., Inc.
Sylmar, CA
Unlimited.
Gray epoxy 4001PS001 with
CS4902 curing solution
AkzoNobel
Waukegan, IL
Aviation Primer, Green,
A-702 (Aerosol)*
Valspar Corporation
Medina, OH
Limited or touch-up use only.
* Shelf life is two years.
20-76 Powder Coat
PRODUCT MANUFACTURER
Interpon 100-AL101QF Gray
Zinc Rich Epoxy Powder*
AkzoNobel
Santa Fe Springs, CA
81-2158 Vitralon Grey
Zinc Rich Epoxy Powder*
Pratt & Lambert Chemical Coatings
Buffalo, NY
39/80020 Smooth Matte
Black
Polyester Topcoat Powder*
Tiger Drylac USA
Cucamonga, CA
* Shelf life is 12 months from date of manufacture at ambient temperature.
MAY 2015 Chapter 20 Standard Practices Page 20.17