95-71 Garmin GDU 620 Display Installation (continued)
E. Scheduled Maintenance and Inspections
Refer to Garmin G500H Instructions for Continued Airworthiness.
F. Special Maintenance and Inspections
1. Turn battery & avionics switches off. Open circuit breaker panel and upper console.
2. Inspect condition of and verify no obvious damage to Garmin GDU 620, copper
bus bars, circuit breaker, and wiring. Verify no loose, chafed, or broken wires or
terminals. Verify no evidence of arcing. Verify equipment security.
3. Secure circuit breaker panel and upper console. Perform ground checks per Part D
steps 4 and 5.
Page 95.12 Chapter 95 Instrument System MAY 2015
To Next Page
Loading...