To restart operation:
1. Press the key (A) to synchronise the various parts (rotary ring, pressers) (see 6.9. “Machine start-up”-
“Synchronisation of the rotary ring”).
2. If necessary, remove the product to be wrapped or partially wrapped from the machine.
3.
If necessary, block the film in the clamp (see 6.9. “Machine start-up” - “Film insertion in the clamp”).
The machine is ready to start a new processing cycle.
Production end stop
This situation occurs when the work shift or machine use is over or when the machine remains inactive or not attended
for a certain period of time.
1. Turn main switch to pos. 0.
To Next Page
Loading...
