“Total” and “central bands” wrapping
After the product has been placed on the infeed conveyor, press the button “Start” on the control panel to enable the
automatism and press the foot pedal control to start the work cycle.
Phase 1
The conveyor starts and moves the product towards the
rotary ring.
The product engages photocell (B1), the infeed presser
lowers and blocks the product, the “head positioning”
timer starts.
After the timer count is over, the conveyor stops; the
rotary ring starts counting the “reinforcing wrappings”; the
head of the product is wrapped.
To Next Page
Loading...
