AX10 Palletizing Solution
8.3.1. PowerPick10 Vacuum Gripper (Optional)
For more information about the fastener specifications of the Vacuum Gripper, please refer to the Maintenance section of the
PowerPick10 user manual available at support.robotiq.com.
CAUTION
Unless specified, any repairs performed on the Vacuum Gripper or Vacuum Generator should be done
by Robotiq, otherwise the warranty will be void.
8.4. Cleaning
8.4.1. Palletizing Solution
The solution should be cleaned at regular intervals depending on the environment in which it is located.
Clean the mechanical components (including the guide rail of the linear axis)with a soft cloth, as required.
Use non-abrasive cleaning agents and media.
Periodically clean the linear axis controller air filters and replace them when necessary.
Gently clean the photoelectric pallet sensor window using a soft cloth as needed.
8.4.2. PowerPick10 Vacuum Gripper (Optional)
For more information about the cleaning guidelines of the Vacuum Gripper, please refer to the Maintenance section of the
PowerPick10 user manual available at support.robotiq.com.
8.5. Storage
Ensure short storage times. Choose cool, dry and well-shaded environments.
To Next Page
Loading...
