ROBOTIQ AX10 - Required Tools and Equipment

AX10 Palletizing Solution
Fig. 3-1: Components of the Robotiq AX10 Palletizing Solution
3.2. Required Tools and Equipment
The following tools are required to install the Palletizing solution.
Included:
l
1 x 1/2 in x 6 in concrete drill bit
l
1 x 2 mm hex key
l
1 x 3 mm hex key
l
1 x 4 mm hex key
l
1 x 5 mm hex key
l
1 x 6 mm hex key
l
1 x 10 mm hex key
l
1 x 13 mm socket, 3/8 in square drive
l
1 x 17 mm socket, 3/8 in square drive
l
1 x 3/4 in socket, 3/8 in square drive
l
1 x 4.8 mm flat screwdriver
Optional:
l
1 x 21 mm / 24 mm double-ended wrench
28