ROBOTIQ AX10 - Page 29

AX10 Palletizing Solution
Not included:
l
Lifting equipment (min. capacity of 200 kg) such as a gantry crane, overhead crane, jib crane, chain block or forklift with a
proper lifting hook
l
Power screwdriver
l
#2 Phillips bit
l
2.5 mm slotted screwdriver
l
Utility knife
l
Ratcheting socket wrench with 10 mm (3/8 in) drive or adapter
l
Torque wrench with 10 mm (3/8 in) drive or adapter, minimum torque range of 20 - 50 Nm (14.8 - 36.9 ft-lb)
For the installation of the concrete anchors provided by Robotiq:
l
Hammer drill
l
Hammer
29