Robotiq Screwdriving Solution - Instruction Manual
12.Harmonized Standardsand Declarations
The standardslisted in the table below were followed, as far as applicable, for the design and production of the Robotiq
Screwdriving Solution. The declarations are available for download on Robotiq’s support department website (Robotiq
Screwdriving Solution > Universal Robots > Documents> Standards, Declarationsand Certificates).
ISO 12100:2010 Safety of machinery — General principlesfor design — Risk assessment and risk reduction
ISO 4414:2010
Pneumatic fluid power — General rulesand safety requirements for systemsand their
components
ISO 9409-1:2004 Manipulating industrial robots— Mechanical interfaces — Part 1: Plates
EN 61000-6-2:2016 Generic Standards – Immunity for industrial environments
EN 61000-6-4:2007 +
A1:2011
Generic Standards – Emission for industrial environments
ANSI/ESD SP10.1-2016
ESD Association Standard Practice for the Protection of Electrostatic Discharge
Susceptible Items – Automated Handling Equipment (AHE)
94
To Next Page
Loading...
