Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.4.1 15.11.2016 38 / 135
Confidential
phone Group they are belonged to.
Tick this check box to allow router automatically connects to cellular
network with preset interval which you preset in Periodically Connect
Interval.
Periodically Connect
Interval (s)
Periodically Connect Interval for Periodically Connect.
Select the Time Range to allow router automatically connects to cellular
network during this time range.
Adding the Time Range for Time Schedule. You can set the days of one
week and at most three ranges of time of one day.
Set the preferred SIM card from SIM 1, SIM 2 or Auto.
Switch to backup SIM
card when connection
fails
Router will switch to another SIM card if main SIM card fail to connect to
network.
Switch to backup SIM
card when ICMP
detection fails
If the packet loss rate of ICMP’s pings or average duration of each ping
exceeds the set value, the router will switch to the backup card. There
are two critical condition, packet loss rate and average duration of each
ping.
Set the total number of pings; fetch value from 5 to 100.
Average Ping
(100~5000ms)
Set the duration of average ping; fetch value from 100 to 5000ms.
Set the total packet loss rate.
Switch to backup SIM
card when roaming is
detected
Router will switch to backup SIM card when preferred SIM card is
roaming.
The identifier for Router to check if it is in home location area or in
roaming area, and decide if it needs to switch back to preferred SIM card.
Switch to backup SIM
card when data limit is
exceeded
If the SIM card that the router worked with currently has reached the
data traffic limitation you preset, it will switch to the other SIM card.
When both data limit is
exceeded
“Stay in Backup SIM Card”, “Switch Back Main SIM Card” or “Disable
Cellular Until Data Is Cleared” is optional.
“Time of Day”, “Day of Week” or “Day of Month” is optional.
Time of Day: the format is hh:mm; specify one point-in-time of every day
to zero out the data flow.
Day of Week: select from Sunday to Saturday; specify one day of every
week to zero out the data flow.
Day of Month: select from 1 to 31; specify one day of every month to
zero out the data flow.
Set the monthly data traffic limitation.