Robustel GoRugged R3000 Lite - Page 40

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.4.1 15.11.2016 39 / 135
Confidential
(MB)
Already used (KB)
This tab will show how many data traffic has been used.
0
Switch back main SIM
card after timeout
Enable to Switch back Main SIM card after the Initial timeout.
Disable
Initial Timeout(min)
Set the initial timeout.
60
Roaming Network Setting
Roaming Network
Selection
Tick to enable the roaming network setting; then the router will
automatically search for and connect to the roaming network with good
signal.
Disable
Signal Threshold
The network will be switched when the signal value of current network is
less than the set signal value. The order of switching network will switch
according to the queried PLMN list of R3000 Lite.
0
Preferred PLMN
PLMN list will generally have an optimal PLMN. The specific network will
be selected automatically by the module if the optimal PLMN is null;
otherwise, the R3000 Lite will choose the corresponding network of the
optimal PLMN.
Null
PLMN Status List
If the current SIM card supports multiple networks, R3000 Lite will query
all network info of this card supported. This information will be displayed
in the PLMN list, click the Refresh button to refresh the current SIM card
information.
Null
Network Address Translation
Enable Nat Function
Tick to enable the SNAT function
Enable