Robustel R1520 User Manual

Robustel R1520 User Guide
RT056_UG_R1520_v.1.0.3 Dec. 25, 2021 77/159
Click to add filtering rules. The maximum count is 50. The window is displayed as below when defaulting “All” or
choosing “ICMP” as the protocol. Here take “All” as an example.
The window is displayed as below when choosing “TCP”, “UDP” or “TCP-UDP” as the protocol. Here take “TCP” as an
example.
Filtering
Item
Description
Default
General Settings
Enable Filtering
Click the toggle button to enable/disable the filtering option.
ON
Default Filtering Policy
Select from “Accept” or “Drop”. Cannot be changed when filtering
rules table is not empty.
 Accept: Router will accept all the connecting requests except the
hosts which fit the drop filter list
 Drop: Router will drop all the connecting requests except the
hosts which fit the accept filter list
Accept
Access Control Settings
Enable Remote SSH Access
Click the toggle button to enable/disable this option. When enabled,
the Internet user can access the router remotely via SSH.
OFF
Enable Local SSH Access
Click the toggle button to enable/disable this option. When enabled,
the LAN user can access the router locally via SSH.
ON

Robustel R1520 Specifications

General

Brand	Robustel
Model	R1520
Category	Wireless Router
Language	English