Robustel R1520 User Guide
RT056_UG_R1520_v.1.0.3 Dec. 25, 2021 83/159
General Settings @ Tunnel
Indicate the ordinal of the list.
Click the toggle button to enable/disable this IPsec tunnel.
Enter a description for this IPsec tunnel.
Enter the address of remote side IPsec VPN server. 0.0.0.0 represents for any
address.
Select from “Tunnel” and “Transport”.
Tunnel: Commonly used between routers, or at an end-station to a router,
the router acting as a proxy for the hosts behind it
Transport: Used between end-stations or between an end-station and a
router, if the router is being treated as a host-for example, an encrypted
Telnet session from a workstation to a router, in which the router is the
actual destination
Select the security protocols from “ESP” and “AH”.
ESP: Use the ESP protocol
AH: Use the AH protocol
Enter the local subnet’s address with mask protected by IPsec, e.g.
192.168.1.0/24
Enter the remote subnet’s address with mask protected by IPsec, e.g. 10.8.0.0/24
Select the link to build Ipsec.
The window is displayed as below when choosing “PSK” as the authentication type.
To Next Page
Loading...
Need help?
General