Roche Cedex Bio System - Page 489

Roche Diagnostics
Operator’s Manual · Version 3.1 F-19
Cedex Bio System Index
results
– list, A–96
– printing of samples, B–58
– samples, B–51
– samples, if sample on board, B–52
– samples, if sample removed, B–53
– validating for QC, B–72
– validating of samples, B–51
revision history, 2
rotor
– cleaning, C–10
– overview, A–56
S
safety, A–3
– approved parts, A–8
– biohazardous materials, A–6
– calibration, B–59
– classification, A–5
– cross-contamination, A–9
– data security, A–10
– disposal of instrument, A–11
– during End of Shift phase, B–77
– during Prepare phase, B–12
– during routine operation, B–5
– electrical, A–5
– electromagnetic devices, A–8
– insoluble contaminants, A–9
– installation, A–7
– instrument covers, A–6
– ISE operation, E–19
– operation and maintenance, A–6
– operator breaks, A–9
– operator qualifications, A–9
–optical, A–6
– performing ISE maintenance, E–42
– performing QC, B–68
– power supply, A–8
– reagents and working solutions, A–7
– spillages, A–9
– third-party software, A–8
–transport, A–5
–waste, A–7
– when analyzing samples, B–34
– when exchanging external bottles, B–15
– when handling cuvettes, B–28
– when handling external bottles, B–15
– when handling reagents, B–22
– when removing reagent disk, B–87
– when troubleshooting ISE, E–70
– when using the barcode scanner, B–89
– with flags, D–27
– with maintenance actions, C–8
sample area
– cleaning, C–14
– overview, A–44
sample handling, overview, A–30
sample ID, A–31
sample overview, screen, A–84
sample results
–accepting, B–57
–auto accept, B–51
– checking for not accepted, B–80
– deleting, B–94
– printing, B–58
– validating, B–51
– validating if sample on board, B–52
– validating if sample removed, B–53
samples
–analyzing, B–34
– barcodes, A–60
– checking the status, B–44
– handling, A–30
– introduction to handling, A–30
– overview, B–50
– reading barcodes, B–90
– short guide, B–35
– specifications, A–65
sampling stop, A–116
scanners, A–59
scheduling, calibration, B–96
screens
– alarms, A–80
– applications, A–108
– applications list, A–109
– calibration list, A–101
– configuration, A–106
– cuvette status, A–89
– diagnostics, A–112
– display items, overview, A–71
– expanding and collapsing lists, A–74
– export, A–115
– external bottle status, A–93
– extra wash cycles, A–110
– host codes, A–110
– import, A–114
– inventory, A–113
– ISE status, A–91
–keyboards, A–74
– layout, A–70
– Loadlist, A–104
– lot data, A–102
– lot list, A–103
– maintenance, A–107
– messages, A–80, D–5
– navigation, A–72
– orders list, A–95