Roche Cedex Bio System - Page 488

Roche Diagnostics
F-18 Operator’s Manual · Version 3.1
Index Cedex Bio System
Q
QC
– Default QC, B–68
– definitions, B–165
– interpreting history, B–74
– Interval QC, B–68
– list, A–98
– overview, A–29
– performing, B–68
– performing Default QC, B–70
– performing Interval QC, B–71
– short guide, B–69
– status list, A–98
– when due, A–29
QC history
– graph, B–75
– interpreting, B–74
– screen, A–99
QC history graph, screen, A–100
QC results
– auto accept, B–72
– deleting, B–96
– validating, B–72
QC status list, screen, A–98
qualifications, of operators, A–9
quality control
–See, QC.
R
ratios
– calculation definitions, B–155
– defining, B–146
reagent bottles, A–53
– reading barcodes, B–89
– specifications, A–66
reagent cooler, removing condensation, B–124
reagent disks
– cleaning, C–14
– ID, A–58
–loading, B–21
– overview, A–57
– preparing, B–116
– realigning, D–50
– removing, B–87
– storage container, A–58
reagent handling, overview, A–24
reagent lots
– viewing, B–99
reagent mixing
– screen, A–111
reagent sets, A–25
– checking status, B–23
– deleting from inventory, B–120
reagent status, screen, A–90
reagents
– barcodes, A–60
– bottles, A–53
– cooling, A–58
– exchanging, B–25
– handling, A–56
– introduction to handling, A–24
–loading, B–26
– preparing, B–22, B–25
– removing, B–25
– replacing, B–25
–safety, A–7
– sets, A–25
reference ranges, ratios, B–156
refilling
– printer paper, B–122
– water container, B–16, B–86
removing, B–50
– reagent disk, B–87
– reagents, B–25
– sample tubes, B–50
repeating, tests, B–55
Replace ISE pump tubing, maintenance action, E–54
Replace ISE unit tubing, maintenance action, E–57
Replace photometer lamp, maintenance action, C–24
Replace water inlet filter, maintenance action, C–19
replacing
– cleaner bottle, B–18
– cuvettes, B–29, B–85
– electrodes, E–32
– ISE bottles, E–22, E–30
– printer paper, B–122
– probe, B–125
– reagents, B–25
– water container, B–16, B–86
rerunning, tests, B–56
restarting the system, A–116
restoring database, B–113
result conversion, B–156
result handling
– definitions, B–165
– overview, A–33
result list, screen, A–96
results
–calibration, B–65
– checking for not accepted sample results, B–80
– checking for transmission, B–81
– cleaning up at end of shift, B–84
– deleting of calibration, B–95
– deleting of QC, B–96
– deleting of samples, B–94
– exporting, B–83, B–105
– flags, D–23
– handling, A–33
– introduction to handling, A–33