Roche cobas b 221 system

Roche Diagnostics May 2009
Service Manual · Version 9.0 G-7
cobas b 221 system 8 Versions
Service Manual
Version 3.0
4-13 Replacing the AutoQC steel tube
4-14 Replacing the AQC temperature sensor
4-17 Replacing the toothed belt (long)
5-I Table of contents
5-1 - 5-34 Fluid actions
6-I Table of contents
6-1 Baro settings; Miscellaneous settings
6-3 COOX module
6-4 T&D needle calibration
6-5 Delete all databases
7-I Table of contents
7-1 Maintenance
7-4 Maintenance
8-I Table of contents
8-41 Troubleshooting
8-46 Troubleshooting
8-48 - 8-53 Important test routines
8-54 - 8-64 General fluidics test
9-1 to 9-4 Index
Chapter–Page Modification / Addition
Ta b le G - 4
Version Nr. Date of Release Modified Chapters Applicable from Software Version
3.0 June 2004 2, 3, 4, 6, 8, 9 3.01
Ta bl e G -5
Chapter–Page Modification / Addition
Cover Page Version Nr. and Date
Table of contents Update
2-1 Version list
3-37 Replacing the tHb/SO
2
module
3-64 Replacing the Screen/PC Unit
3-66 Replacing the hard disk
6-1 Sample counter
6-2 Instrument type
6-3 COOX module
6-4 AVR-tools; Initialization; Shutdown PC
6-5 Simulation mode; AQC adjustment; Logmonitor-connection information
8-36 Value flag 2024 deleted
8-53 COOX (Roche OMNI S 2, 4, 6 only)
Ta b le G - 6