EasyManua.ls Logo

Roche cobas b 221 system

Roche cobas b 221 system
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Roche Diagnostics May 2009
G-12 Service Manual · Version 9.0
8 Versions cobas b 221 system
Service Manual
Version 8.0
C-5 Decontaminaten moved from part A; all sub sections updated
D Error 10045, 10155; Error 20000, 20019, 20032...20034, 20035, 20048...20050, 20051, 20072,
20086, 20087...20089, 20096, 20142; Warning 30032, 30033: software text modified
D-19 Error 10046 "Waste line blocked": modified
D-24 Errors 10099...10106: description (first line) new
D-28 Error 10288: separated from Errors 10289...10294; Error 10288 modified
D-36 Error 10488: modified
D Flag 1006, 1009: "Calibration solution #" replaced by "CAL #"
D-48 Error 20098: added
D-126 Service report: new
Part–Page Modification / Addition
Ta b le G - 16
Version Nr. Date of Release Modified Chapters Applicable from Software Version
8.0 December 2007 see below 7.00
Ta bl e G -17
Part–Page Modification / Addition
Table of contents Updated
Version, Date Update: Version 8.0, December 2006
all Instrument model notation: <x>/<y> modified to <x/y>
all Software paths (in call-up of functions): modified to "h [System] > ..." (no "[Analyzer]")
A-19 Figure A-7: Pin assignment of S2 FluidPack and Figure A-7: Pin assignment of
S2 FluidPack A: modified
B-5 Sample counter: updated; Logon with Operator ID: new; Bili: updated
B-7 Load default setup: new
B-11 System backup / restore: new
B-15 Chapter renamed to "Components" for readability
B-17 Folding up the central measuring unit: step 6: updated
B-77 Replacing the vacuum pump head: removed
B-93 Figure B-69: Touch screen/PC unit, interface unit and hard disk compatibility: updated
B-96,
B-99
Replacing the touch screen/PC unit: cross reference to "System backup / restore" added
Replacing the hard disk: updated
B-98 Figure B-77: better quality, speaker cable added
B-100 Replacing the TFT backlight: removed
B-133
B-134
B-137
Replacing the AutoQC steel tube,
Replacing the AQC temperature sensor,
Replacing the toothed belt (long): modified
C-10, C-11, C-12, C-13 Maintenance step: check vacuum system: yearly maintenance: new; three yearly maintenance:
modified (instead of vacuum pump head)
D-11 Hard disk information: hard disk symbols: updated
D-12 cobas bge link screen sharing: updated
Ta b le G - 18

Table of Contents

Related product manuals