12 Rockwell Automation Publication 520-UM001K-EN-E - August 2021
Preface
• Parameter numbers and names are shown in this format:
• The following words are used throughout the manual to describe an
action:
• The Studio 5000® Engineering and Design Environment combines
engineering and design elements into a common environment. The
first element in the Studio 5000 environment is the Logix Designer
application. The Studio 5000 Logix Designer® application is the
rebranding of RSLogix 5000® software and will continue to be the
product to program Logix 5000â„¢ controllers for discrete, process,
batch, motion, safety, and drive-based solutions. The Studio 5000
environment is the foundation for the future of Rockwell Automation®
engineering design tools and capabilities. It is the one place for design
engineers to develop all the elements of their control system.
Drive Frame Sizes
Similar PowerFlex 520-series drive sizes are grouped into frame sizes to
simplify spare parts ordering, dimensioning, and so on. A cross-reference of
drive catalog numbers and their respective frame sizes is provided in
Appendix B
.
P 031 [Motor NP Volts]
Name
Number
Group
b
P
t
C
L
d
A
N
M
f
G
= Basic Display
= Basic Program
= Terminal Blocks
= Communications
= Logic
= Advanced Display
= Advanced Program
= Network
= Modified
= Fault and Diagnostic
= AppView and CustomView
Words Meaning
Can Possible, able to do something
Cannot Not possible, not able to do something
May Permitted, allowed
Must Unavoidable, you must do this
Shall Required and necessary
Should Recommended
Should Not Not Recommended
To Next Page
Loading...
Need help?
General
