Rohde & Schwarz FSW Series - 5.8.1 Basic Demodulation Measurement Parameters (Demod)

Configuration
R&S
®
FSW-K7
107User Manual 1173.9240.02 ─ 17
● Basic Demodulation Measurement Parameters (Demod).....................................107
● Demodulation Spectrum........................................................................................110
● AF Filter.................................................................................................................113
● Scaling.................................................................................................................. 117
● Units......................................................................................................................120
5.8.1 Basic Demodulation Measurement Parameters (Demod)
The basic demodulation measurement parameters define how the measurement is
performed. They are configured in the "Demod" tab of the "Demodulation Settings" dia-
log box.
► To display this dialog box, do one of the following:
● Select the "Demod Settings" button in the Analog Demodulation "Overview"
and select the "Demod" tab.
● Select the MEAS CONFIG key and then the "Demod Config" softkey.
Squelch State..............................................................................................................108
Squelch Level..............................................................................................................108
AF Coupling................................................................................................................ 108
Selected Trace............................................................................................................108
Time Domain Zoom.....................................................................................................109
└ State..............................................................................................................109
Demodulation