Rohde & Schwarz FSW Series - 6.3.1 Individual Marker Setup

Analysis
R&S
®
FSW-K7
135User Manual 1173.9240.02 ─ 17
6.3.1 Individual Marker Setup
In the Analog Demodulation application, up to 17 markers or delta markers can be acti-
vated for each window simultaneously. Initial marker setup is performed using the
"Marker" dialog box.
The markers are distributed among 3 tabs for a better overview. By default, the first
marker is defined as a normal marker, whereas all others are defined as delta markers
with reference to the first marker. All markers are assigned to trace 1, but only the first
marker is active.
Selected Marker..........................................................................................................135
Marker State................................................................................................................136
Marker Position (X-value)............................................................................................136
Marker Type................................................................................................................136
Reference Marker....................................................................................................... 136
Linking to Another Marker...........................................................................................136
Assigning the Marker to a Trace................................................................................. 137
All Markers Off............................................................................................................ 137
Selected Marker
Marker name. The marker which is currently selected for editing is highlighted orange.
Remote command:
Marker selected via suffix <m> in remote commands.
Marker Settings