Rohde & Schwarz FSW Series - Page 311

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
311User Manual 1173.9240.02 ─ 17
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT
This command moves a marker to the next higher value.
Usage: Event
Manual operation: See "Search Mode for Next Peak" on page 140
See "Search Next Peak" on page 141
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
This command moves a delta marker to the highest level.
If the marker is not yet active, the command first activates the marker.
Usage:
Event
Manual operation: See "Peak Search" on page 141
CALCulate<n>:
DELTamarker<m>:MAXimum:RIGHt
This command moves a delta marker to the next higher value.
The search includes only measurement values to the right of the current marker posi-
tion.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 140
CALCulate<n>:DELTamarker<m>:MINimum:LEFT
This command moves a delta marker to the next higher minimum value.
The search includes only measurement values to the right of the current marker posi-
tion.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 140
CALCulate<n>:DELTamarker<m>:MINimum:NEXT
This command moves a marker to the next higher minimum value.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 140
See "Search Next Minimum" on page 142
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]
This command moves a delta marker to the minimum level.
If the marker is not yet active, the command first activates the marker.
Analyzing Results