Rohde & Schwarz FSW Series - Page 310

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
310User Manual 1173.9240.02 ─ 17
CALCulate<n>:MARKer<m>:MINimum:NEXT
This command moves a marker to the next minimum value.
Usage: Event
Manual operation: See "Search Mode for Next Peak" on page 140
See "Search Next Minimum" on page 142
CALCulate<n>:MARKer<m>:MINimum[:PEAK]
This command moves a marker to the minimum level.
If the marker is not yet active, the command first activates the marker.
Usage:
Event
Manual operation: See "Search Minimum" on page 141
CALCulate<n>:
MARKer<m>:MINimum:RIGHt
This command moves a marker to the next minimum value.
The search includes only measurement values to the right of the current marker posi-
tion.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 140
Positioning Delta Markers
The following commands position delta markers on the trace.
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT...........................................................310
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT.......................................................... 311
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]........................................................ 311
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt..........................................................311
CALCulate<n>:DELTamarker<m>:MINimum:LEFT............................................................311
CALCulate<n>:DELTamarker<m>:MINimum:NEXT........................................................... 311
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]......................................................... 311
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt...........................................................312
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT
This command moves a delta marker to the next higher value.
The search includes only measurement values to the left of the current marker posi-
tion.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 140
Analyzing Results