Instrument Functions
NRP2
114User Manual 1173.9140.02 ─ 07
6. Only for R&S NRP-Z8x wideband power sensors and if a time resolution beyond
the sample period is required:
Enable automatic activation of "Equivalent Time Sampling"
.
7. Close the "Mode" dialog (MENU key).
The trace window displays the waveform and the measurement results.
If the trace display is not visible check the trigger settings, see chapter 4.2.6, "Trigger
settings", on page 85.
4.5.2
Trace window
A trace measurement is displayed graphically, either in full height or in a half height
window.
In half height window the meter shows the waveform(s) and an info panel indicating
selected measurement results or instrument settings. Control elements to directly
change the settings are not available.
Fig. 4-44: Trace window, half height display
Displaying traces
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
