Instrument Functions
NRP2
138User Manual 1173.9140.02 ─ 07
Fig. 4-63: Statistics display with additional table
The table always indicates the logarithmic values independent of the settings for the
graph.
Configuring the statistics display
►
Select "Stat's Config..."
in the control panel opened via the Window→Graph→"Dis-
play"→"Stat's" → control panel ("Trace&Statistics" sensor mode).
Stat's Config / Scale
Fig. 4-64: Stat's Config / Scale tab
The "Scale" tab contains the parameters for setting the axes of the display.
Max. Power ← Stat's Config / Scale
Enters the maximum value of the power scale as reference.
Power / div ← Stat's Config / Scale
Defines the scaling of the power axis.
Y Start ← Stat's Config / Scale
Enters the start value of the Y axis. Depending on the distribution function only a
restricted range of value or no entry at all is allowed.
Y Division ← Stat's Config / Scale
Defines the scaling of the Y axis.
Displaying traces
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
