Instrument Functions
NRP2
137User Manual 1173.9140.02 ─ 07
the power (x) marker is positioned to a power value; the associated
value of the distribution (distribution density) function is measured.
the result (y) marker is positioned to a measured value of the distribu-
tion (distribution density) function; the associated power value is indi-
cated.
If there are several power values that coincide with the set value of
the distribution (distribution density) function, the result marker can be
positioned to the wanted value using the left/right cursor keys.
Gate / Cont
Defines the acquisition interval. Four gates and an unsynchronized time interval "Cont"
can be selected. The selected acquisition interval is highlighted in the softkey display.
Moreover, if a gate is selected, its number is enlarged.
"[1] [2] 3 [4]"
Select one of four provided gates.
"Cont"
Select the unsynchronized time interval.
Note:
The length of the time interval can be set in the Aperture dialog
box of the "Stat's function" dialog.
Auto
Scales the result and the power axis in such a way that the trace is optimally displayed.
Statistic Functions
Opens the "Statistics Functions" subdialog for selection of a distribution function and
one or two traces for display. A statistical evaluation of combined results from different
channels, e.g. power ratios, is not supported.
4.5.8.2
Statistics diagram settings
Activate indication of additional values or open menu for configuration of the statistics
display in the
"Stat's Config" dialog box, including markers.
Activating tabular indication of statitical values for CDF and CCDF
► Select "Stat's Config..." in the control panel opened via the Window→Graph→"Dis-
play"→"Stat's" →
control panel ("Trace&Statistics" sensor mode).
Displaying traces
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
