Getting Started
NRP2
33User Manual 1173.9140.02 ─ 07
Fig. 2-9: Offset dialog box / Global activated
Tip: Factors which are not, or only minimally, depending on frequency can be cor-
rected in this way.
7.
Press the
↵MENU hardkey twice to exit the dialog box and the menu.
If you have connected an attenuator and entered its attenuation, the R&S NRP2
will display about the same value as before.
Fig. 2-10: Result window / Offset
In the note line of the result window, the Δ symbol indicates that global offset cor-
rection is active.
Performing relative power measurements
The R&S NRP2 calculates and displays also the relative difference between a mea-
sured value and a reference value. The reference value can be a measured value that
has been saved or an arbitrary value that is entered.
1.
Select the "Measurement"
menu.
2. Open the "Measurement" menu with ↵MENU.
Measuring average power (Cont Av mode)
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
