Rohde & Schwarz SMIQ02B - Page 173

Digital Modulation SMIQ
1125.5555.03 E-92.104
SELECT
STANDARD...
Opens a window for selecting the standard. After the selection, the modulation
parameters MODULATION, SYMBOL RATE, FILTER and CODING are
automatically adjusted to the standard. USER is indicated if the settings of
these parameters do not correspond to the selected standard. The following
standards are available:
APCO4FM IEC\IEEE-bus command
:SOUR:DM:STAN APCF
APCOQPSK IEC\IEEE-bus command :SOUR:DM:STAN APCQ
ASK STD-T55 IEC\IEEE-bus command :SOUR:DM:STAN ASK
BLUETOOTH IEC\IEEE-bus command :SOUR:DM:STAN BLU
CDPD IEC/IEEE-bus command :SOUR:DM:STAN CDPD
CT2 IEC/IEEE-bus command :SOUR:DM:STAN CT2
DECT IEC/IEEE-bus command :SOUR:DM:STAN DECT
GSM IEC/IEEE-bus command :SOUR:DM:STAN GSM
GSM_EDGE IEC/IEEE-bus command :SOUR:DM:STAN GSME
IRIDIUM IEC\IEEE-bus command :SOUR:DM:STAN IRID
IS95 FWD IEC\IEEE-bus command :SOUR:DM:STAN FIS95
IS95 REV IEC\IEEE-bus command :SOUR:DM:STAN RIS95
NADC IEC/IEEE-bus command :SOUR:DM:STAN NADC
PDC IEC/IEEE-bus command :SOUR:DM:STAN PDC
PHS IEC/IEEE-bus command :SOUR:DM:STAN PHS
TETRA IEC/IEEE-bus command :SOUR:DM:STAN TETR
TFTS IEC/IEEE-bus command :SOUR:DM:STAN TFTS
PWT IEC/IEEE-bus command :SOUR:DM:STAN PWT
ICOBPSK IEC\IEEE-bus command :SOUR:DM:STAN ICQB
ICOGMSK IEC\IEEE-bus command :SOUR:DM:STAN ICQG
ICOQPSK IEC\IEEE-bus command :SOUR:DM:STAN ICQQ
WORLDSPACE IEC\IEEE-bus command :SOUR:DM:STAN WORL
(only with option SMIQB17)
WCDMA QPSK IEC/IEEE-bus command
:SOUR:DM:STAN QWCD
(
only with option SMIQB47)
ARIB STD-T55 IEC/IEEE-bus command :SOUR:DM:STAN AT55
MODULATION...
Opens a window for defining the modulation method. Moreover, the number
of bits per modulation symbol is displayed. See also Section "Digital
Modulation Methods and Coding".
FREQ
100. 000 000 0
MHz
FREQUENCY
LEVEL
ANALOG MOD
VECTOR MOD
DIGITAL MOD
DIGITAL STD
LF OUTPUT
SWEEP
LIST
MEM SEQ
UTILITIES
Π
ΠΠ
Π/4DQPSK
STATE
SOURCE...
SELECT STA
MODULATION
SYMBOL RAT
FILTER...
CODING...
TRIGGER MO
TRIGGER...
CLOCK...
TYPE...
F
/4DQPSK 2 b/sym
MODULATION DELAY
LEVEL
-30.0
dBm
PEP
-
27.6
dBm
Fig. 2-63 DIGITAL MOD - MODULATION... menu, SMIQ equipped with option Modulation Coder
SMIQB20 and option Data Generator SMIQB11