Digital Standard GSM/EDGE SMIQ
1125.5555.03 2.314 E-9
(SELECT SLOT...)
DUMMY
BURST TYPE
Opens a window for the selection of the burst type used to
configure the selected slot.
DUMMY Synchronization Burst
IEC/IEEE-bus command
SOUR:GSM:SLOT2:TYPE DUMM
SLOT LEVEL
Selection of level for selected slot.
OFF Maximum attenuation
IEC/IEEE
:SOUR:GSM:SLOT2:LEV OFF
FULL The level corresponds to the value indicated on
the SMIQ LEVEL display.
IEC/IEEE
:SOUR:GSM:SLOT2:LEV FULL
ATTEN The level is reduced by the value set under
SLOT ATTENUATION.
IEC/IEEE .....
:SOUR:GSM:SLOT2:LEV ATT
TAIL
Display of data content in the 3 bit data field "Tail ". The tail
bits are set to 000 according to the GSM standard.
MIXED
Display of data content of the mixed-bit field. It has a data
content stipulated by GSM 05.02, the so-called mixed bits":
11111011011101100000101001001110000010010001000000
01111100011100010111000101110001010111010010100011
001100111001111010011111000100101111101010
GUARD
Display of data content in the Guard field in binary form. The
length of the field is 8 bit in slots 1,2,3,5,6,7 and 9 bit in slots
0 and 4. It is thus ensured that a frame has exactly 1250 bit
as stipulated in the GSM standard.
To Next Page
Loading...
