SMIQ Digital Standard GSM/EDGE
1125.5555.03 E-92.317
(SELECT SLOT...)
EDGE
DATA
Selection of the data source for the DATA fields. These fields
are considered as one continuous field, i.e. a pseudo
random sequence continues seamlessly from one DATA
field to the next. The following data sources can be chosen:
PN.. PRBS data according to CCITT with period
lengths between 2
9
-1 and 2
23
-1.
IEC/IEEE
:SOUR:GSM:SLOT3:DATA PN15
DLIST Data from a programmable data list.
IEC/IEEE
:SOUR:GSM:SLOT3:DATA DLIS
SERDATA Data via the data input SER DATA.
IEC/IEEE
:SOUR:GSM:SLOT3:DATA SDAT
TSC...
Opens a window for selecting the so-called "training
sequence code". One of eight different training sequences
can be chosen.
IEC/IEEE-bus command
:SOUR:GSM:SLOT2:TSC 0
EDIT
Field for entering changes to the training
sequence in binary form. A modified training
sequence is saved as USER sequence after
SAVE FRAME was called.
IEC/IEEE bus command
:SOUR:GSM:SLOT2:USER #B011011...
GUARD
Display of data contents in the GUARD field in binary form.
The length of the field is 24 bits in slots 1, 2, 3, 5, 6, 7, and
27 bits in slots 0 and 4.
SELECT DATA
LIST...
Opens a window for selecting a stored data list or generating
a new list.
COPY CURRENT
DATA LIST TO...
Saves the current data list under a different name.
DELETE DATA
LIST...
Deletes a data list.
EDIT DATA
LIST...
Opens a window for editing a data list bit by bit. The
parameters FREE and LEN indicate the free memory
capacity and the length of the current list (see also chapter 2,
section "List Editor").
COPY Copying part of a list
FILL Filling a part of the list with a pattern
INSERT Inserting a part of the list at a different position
within the list
DELETE Deleting a part of the list
EDIT/VIEW Editing or viewing the list
To Next Page
Loading...
