Roland BK-9 - Copy

Rhythm Track Edit functions
111
Parameter Setting Explanation
Division
Intro 1~4, Main
1~4, Fill Dwn 1~3,
Fill Up 1~3, End
1~4
Use this parameter to select the Division you
want to edit.
From Bar
For the settings and explanation see page 109.
From Beat
From CPT
To Bar
To Beat
To CPT
2. Press the [WRITE] button (its indicator ashes) to conrm
your settings and edit the data.
The display briey conrms the operation and then returns to the
current Composer page.
Copy
This function can be used to copy individual tracks, Modes and
Divisions to replace existing parts while keeping the remaining
parts of the rhythm already in the memory.
Right Display
1. Set “Location” to “Source”.
The following parameters are displayed:
Param-
eter
Setting Explanation
Location Source, Destination
Allows you to select the rhythm whose
tracks you wish to copy (“Source”) to another
rhythm (“Destination”).
Track ADrums~Acc6, ALL
Allows you to select the track you wish to
copy. Select “ALL” to edit all tracks.
Mode Major, Minor, 7th, ALL Allows you to select the Mode to be copied.
Division
Intro 1~4, IntroALL,
Main 1~4, MainALL,
Fill Dwn 1~3, Fill
DwnALL,
Fill Up 1~3, Fill
UpALL,
End 1~4, EndALL
Use this parameter to select the Division you
want to copy.
From Bar
For the settings and explanation see page 109.
From Beat
From CPT
To Bar
To Beat
To CPT
The “Copy” page now displays a “USB MEMORY” eld to indicate that
you can select a rhythm on the connected USB memory.
Right Display
2. Select a rhythm.
• Selecting a factory rhythm: Use the RHYTHM FAMILY buttons
and the displayed parameters to select the desired rhythm. Skip
to step (3) below.
• Selecting an ‘external’ rhythm: You can also work with a rhythm
on a USB memory:
a. Press the [USB MEMORY] button to jump to the “USB
Memory” page.
b. Select the rhythm that contains the track(s) you
want to copy.
NOTE
When you import a rhythm, the “Location” parameter is set to
“Destination”. To continue as explained below, you need to
select the “Source” setting.
3. Rotate the dial to select the “Track” parameter, then push
the dial.
4. Rotate the dial to select the track to be copied.
You can also select “ALL” to copy all tracks of a given Mode/Division.
In that case, “Destination–Track” (see below) is also set to “ALL”.
5. Repeat this operation with the “Mode” and “Division”
parameters to select the Mode (Major, Minor, 7th, ALL)
and Division (Int 1~4, Int ALL, Main 1~4, Main ALL, FDw
1~3, FDw ALL, FUp 1~3, FUp ALL, End 1~4, End ALL).
6. Press the [KEY] button to listen to the Source or
Destination pattern you are about to copy .
NOTE
This audition function is not available when you select “ALL” for
the “Mode” or “Division” eld.
7. Use the “From” and “To” parameters (3 each) to specify the
beginning and end of the excerpt you want to copy.
By default, the “From” parameters are set to “Bar 1, Beat 1, CPT 0”,
while the “To” values are set to include the entire track.
8. Set “Location” to “Destination”. The following parameters