Roland BK-9 - Insert; Key (Transposition)

Rhythm Composer
112
are displayed:
Parameter Setting Explanation
Location Source, Destination
Allows you to select the rhythm whose
tracks you wish to copy (“Source”) to another
rhythm (“Destination”).
Track ADrums~Acc6, ALL
Allows you to select the track you wish to
copy. Select “ALL” to edit all tracks.
Mode Major, Minor, 7th, ALL Allows you to select the Mode to be copied.
Division
Intro 1~4, Main 1~4,
Fill Dwn 1~3, Fill Up
1~3, End 1~4
Use this parameter to select the Division.
Into Bar The” Into” position indicates where the beginning of the source
excerpt will be after the copy operation. To copy the source data to
the beginning of the destination track, select BAR= “1”, BEAT= “1”
and CPT= “0”.
Into Beat
Into CPT
Copy Mode
Replace
The data in the selected range of the source
track overwrite the destination track.
Mix
The data in the selected range of the
source track are added to the data on the
destination track.
Copy Times 1~999
Allows you to to specify the number of
copies to be made. Select “1” to copy the
excerpt only once.
9. Set “Copy Mode” to “Replace” or “Mix”.
In either case, the length of the destination track may change to
include all data of the source track.
10. Use the dial to set “Track” to the track you wish to copy
the data to.
NOTE
AccDrums data can also be copied to other tracks (preferably
Acc1~Acc6). You can only copy ABass data to other ABass tracks.
If you selected “ALL” for “Source – Track”, this “Track” parameter is
also set to “ALL”.
11. Repeat this operation with the “Mode” (Major, Minor, 7th,
ALL) and “Division” parameters (Intro 1~4, Main 1~4, Fill
Dwn 1~3, Fill Up 1~3, End 1~4, ALL).
NOTE
If you selected “ALL” for “Source – Mode” or “Source – Division”,
this “Mode” or “Division” parameter is also set to “ALL”.
12. Use the dial to select “Copy Time” and specify the number
of copies you need.
Select “1” to copy the excerpt only once.
13. Use the dial to specify the target position using the three
“Into” parameters.
14. Press the [WRITE] button (its indicator ashes) to conrm
your settings and edit the data.
The display briey conrms the operation and then returns to the
current Composer page.
Insert
“Insert” allows you to insert space and shift data that lie behind
the “From” position further towards the end of the track (this is the
exact opposite of “Delete”). The empty measures you create can be
“lled” using the “Copy” function or by recording new phrases in
that area.
NOTE
This function provides no “To” pointer. Instead, you need to
specify the length of the insert using the “For” values.
Right Display
1. Use the dial to edit the following parameters.
Parameter Setting Explanation
Track
ADrums~Acc6,
ALL
Allows you to select the track you wish to
edit. You can also select “ALL” here, in which
case the operation applies to all tracks.
Mode Major, Minor, 7th Allows you to select the Mode to be edited.
Division
Intro 1~4, Main
1~4, Fill Dwn 1~3,
Fill Up 1~3, End
1~4
Use this parameter to select the Division you
want to edit.
From Bar
For the settings and explanation see page 109.From Beat
From CPT
For Bar
Species how many bars, beats and CPTs are to be insertedFor Beat
For CPT
2. Press the [WRITE] button (its indicator ashes) to conrm
your settings and edit the data.
The display briey conrms the operation and then returns to the
current Composer page.
Key (transposition)
This function allows you to transpose the notes of the selected track
(non-note data obviously cannot be transposed).
Right Display
1. Use the dial to edit the following parameters.
Parameter Setting Explanation
Track ADrums~Acc6, ALL
Allows you to select the track you wish
to edit. You can also select “ALL” here,
in which case the operation applies to
all tracks.
Mode Major, Minor, 7th,
Allows you to select the Mode to be
edited.
Division
Intro 1~4, Main 1~4,
Fill Dwn 1~3, Fill Up
1~3, End 1~4
Use this parameter to select the
Division you want to edit.