Roland BK-9 - Checking the IP Address and MAC Address (WIRELESS INFO)

Connecting in Ad-Hoc mode
165
Right Display
4. On the iPhone or other wireless device that you want to
connect, select the Ad-Hoc SSID to make the connection.
(For example, on an iPhone, choose [Settings] g [Wi-Fi]
g [Choose a Network] to select the above Ad-Hoc SSID.
A password entry screen will appear; enter the above Ad-
Hoc key.)
For details on how to connect to a wireless LAN from an iPhone or
other device, refer to the owner’s manual of that device.
5. When you want to end the Ad-Hoc mode connection,
restore the iPhone settings in [Settings] g [Wi-Fi] g
[Choose a Network] to their previous state.
NOTE
The Ad-Hoc Mode ON g OFF setting will take eect after you’ve
turned the unit o, then back on again.
Checking the IP Address and MAC
Address (WIRELESS INFO)
Here’s how to check the IP address and MAC address.
1. Select the [MENU] button g “Wireless” g“Wireless Info”.
Right Display
MEMO
The MAC address shows the value indicated on the bottom of
the wireless USB adapter (WNA1100-RL; sold separately).