Roland BK-9 - Copy; Insert

Editing one or several tracks (Track Edit)
87
Left Display Right Display
Parameter Setting Explanation
Track All, Trk 1~ Trk 16
Allows you to select the track you wish
to edit. You can also select “ALL” here,
in which case the operation applies to
all tracks.
From Bar
For details information see p. 85.
From Beat
From Cpt
To Bar
To Beat
To Cpt
COPY
The COPY function allows you to copy one track to another or
excerpts of one or all tracks to a dierent location. The latter is
useful if you need to repeat the chorus several times at the end of
the song but do not feel like recording all those notes.
Left Display Right Display
Parameter Setting Explanation
Source Track All, Trk 1~ Trk 16
Allows you to select the track whose
data you wish to copy
From Bar
For details information see p. 85.
From Beat
From Cpt
To Bar
To Beat
To Cpt
Dest Trk Trk 1~ Trk 16
This is where you select the track to
which you want to copy the selected
data. If you set “Source Track” to “ALL”, the
“Dest Trk” setting cannot be changed.
Into Bar
1~[last measure
of the track or
song]
The bar, beat and CPT values of the
position the rst data of the source track
will be copied to.Into Beat
1~[number of
beats per bar]
Into Cpt 1~119
Parameter Setting Explanation
Copy Mode Replace, Mix
Allows you to specify how the data
should be copied:
• Replace
The selected FROM/TO range overwrites
the data (of the destination track) in
the area to which the selected data are
copied.
• Mix
The data in the selected range of the
source track are added to the data on
the destination track.
Copy Times 1~999
Sets the number of copies you wish to
make. The value “3” means that you will
end up with 3 contiguous copies.
Data Type
ALL, Note,
P.Bender, Control
Change, Program
Change, NRPN,
RPN, CAF,
Allows you to select the data to be
copied.
If “Data Type” (see above) is set to “Note” the following parameters
are displayed also.
Parameter Setting Explanation
From Note C-~G9
This parameter allows you to set the
note (or lower limit of the note range)
to be copied within the specied
“From”/“To” time range.
To Note C-~G9
This parameter allows you to set the
upper limit of the note range to be
copied within the specied “From”/“To”
time range.
If “Data Type” (see above) is set to “Control Change” the following
parameters are displayed also.
Parameter Setting Explanation
From CC 0~127
It allows you to set the lower limit of the
control change numbers or values to be
copied within the specied “From”/“To”
time range.
To CC 0~127
This parameter allows you to set the
upper limit of the control change
numbers or values to be copied within
the specied “From”/“To” time range.
INSERT
INSERT allows you to insert space and shift data that lie behind
the “From” position further towards the end of the song (this is the
exact opposite of DELETE).
These empty measures can be “lled” using the COPY function or by
recording new phrases in that area (using Punch In/Out).
Left Display Right Display