Roland BK-9 - Other Edit Operations

Rhythm Composer
118
Other Edit Operations
The “Micro Edit” page allows you to select several functions.
Right Display
You can select several consecutive events and edit them in one
go: select the rst event of a series, push and hold the dial and
rotate it.
1. Select the event you want to edit.
2. Press the [QUICK MENU] button (its indicator ashes).
The display changes to:
Left Display
The top line shows the event type that can be edited (“CC 10
Panpot” in our example) and its location (“001:01:000”).
If you selected several events the top line shows “Multiple
Events Selected“.
3. Use the dial to select the desired edit function.
4. Depending on the selected function, press [WRITE] button
or push the dial.
Create Event
Select this function to add a new event to the selected track.
Left Display
If the position for which you create a new event already contains
other events, the new event is added at the end of that group.
Parameter Setting Explanation
Event
Note, Control Change,
Program Change,
Pitch Bend, Alteration
Mode
Allows you to specify the event type
you want to add.
To Bar
See page 110.
Species the position where your new
event will be inserted.
To Beat
To CPT
The selected event is inserted with a default value:
Event Default Value
Note
Number 60 (C4)
On Velocity 100
Gate Time 60
Program Change
CC00 Bank Select MSB 0
CC32 Bank Select LSB, 4
P. Change Number
(The bank select messages
are added automatically:
you don’t have to worry
about that)
1
Pitch Bend 0
Alteration Mode
Nearest Limit Low Std
Nearest Limit High Std
Obviously, you will then need to change the default settings
depending on the result you want to achieve.
Press the [WRITE] button to conrm your settings and add
the new event.
The BK-9 returns to the “Micro Edit” page.
Erase Event
This function allows you to remove one or several events without
changing the positions of the remaining events.
MEMO
To select several consecutive events, push the dial button and
rotating the dial towards the left (upward direction) or the right
(downward direction).
Push the dial to remove the event you selected.
The BK-9 returns to the “Micro Edit” page.
Move Event
This function allows you to move one or several events.
Parameter Setting Explanation
To Bar
See page 110.
Species the position to which the
rst event (in chronological order) of
the selected group should be shifted.
To Beat
To CPT
NOTE
If the position to which you move the selected event already
contains other events, the moved event is added at the end of
that group.
NOTE
Events located at “1-01-00” cannot be moved further to the left.
Press the [WRITE] button to conrm your settings and add
the new event.