50
13. Operations on USB Memory
Changing the Name of a File or
Folder (Rename)
1. Connect an optional USB memory to the BK-9 or, if it was
already inserted, press the [USB MEMORY] button.
After a few seconds, the display shows the contents of the USB
memory.
2. Rotate the dial to select the le or folder you want to
rename.
3. Press the [QUICK MENU] button to jump to the “USB
Memory Edit” page.
The display changes to:
Left Display
To return to the BK-9’s main page, press and hold the [EXIT] button.
MEMO
While the contents of the connected USB memory is displayed,
pressing [QUICK MENU] takes you to the “USB Memory Edit”
page where you can select “Rename”, “Delete” or “Search”.
4. Rotate the dial to select “Rename” and push it.
The display shows the following page:
Left Display
5. Use the dial and the TONE [0]~[9] buttons to enter the
desired name. See “How to type a name in BK-9” (p. 27).
6. Press the ashing [WRITE] button to conrm.
Deleting a File or Folder (Delete)
1. Connect an optional USB memory to the BK-9 or, if it was
already inserted, press the [USB MEMORY] button.
After a few seconds, the display shows the contents of the USB
memory.
2. Rotate the dial to select the le or folder you want to
delete.
3. Press the [QUICK MENU] button to jump to the “USB
Memory Edit” page.
4. Rotate the dial to select “Delete” and push it.
The display shows the following page:
Left Display
5. Use the dial to select “YES” (delete) or “NO” (don’t delete).
6. Push the dial to conrm your selection.
If you selected a folder in step (2) above, the BK-9 asks you for a
conrmation:
Left Display
Choose “YES” to conrm or “NO” to abort the operation.
Using the ‘Search’ Function to Locate
Songs or Rhythms
The BK-9 provides a “Search” function that allows you to search the
connected USB storage device for the les you need. This function is
available even while the BK-9 is playing back a song or rhythm, allowing
you to prepare the next song without keeping your audience waiting.
1. Connect an optional USB memory to the BK-9 or, if it was
already inserted, press the [USB MEMORY] button.
After a few seconds, the display shows the contents of the USB
memory.
2. If you know the folder where the le is located, select it
using the dial.
If you are not sure about the location, do not select a folder to avoid