Roland BK-9 - Page 51

Using the ‘Search’ Function to Locate Songs or Rhythms
51
that the “Search” function only looks in that folder.
3. Press the [QUICK MENU] button to jump to the “USB
Memory Edit” page.
4. Use the dial to select “Search”.
The display shows the following page:
Left Display
The rst character position is already selected (“A”).
5. Rotate the dial to select the desired character position.
The buttons below allow you the following operations:
Button Explanation
Press this button to switch between upper-case, lower-case
characters, numbers and symbols.
Press this button to delete the selected character.
Press this button to insert a character.
6. Use the TONE [0]~[9] buttons to enter the desired
characters.
7. Repeat steps (5) and (6) above to complete the character
string you are looking for.
8. Push the dial to start the search.
The BK-9 searches the USB storage device for les whose names
match the character string you entered and displays them. The title
bar shows the path of the folder that contains the selected les.
NOTE
The “Search” function can nd and display 100 les at a time.
9. Use the dial to select the song or rhythm you want to play
back, then press the dial to conrm your selection.
10. Press the [EXIT] button to close the list.
11. Press the [START/STOP] / [ */, ]button to start playback of
the selected song or rhythm.