Roland BK-9 - Quickly Locating Performance Memories; Recall Performance Memories by [NUMERIC] Button; Recall Performance Memories by [FAVORITE] Button

Performance Lists
58
Right Display
In this example, we loaded the “Music Assistant” List.
2. Rotate the dial to select the memory whose settings you
want to use, then push the dial to conrm your selection.
The PERFORMANCE [LIST] button lights to signal that the BK-9 is
now using the settings of the selected Performance memory. The
name of that memory is highlighted.
Right Display
The selected memory also refers to a rhythm or song, which can be
started in the usual ways ([START/STOP] button, [SYNC START], etc.).
During playback of that rhythm or song, you can already select a
new Performance/“Music Assistant”/ “Factory Songs” memory.
MEMO
If the User Program memory loaded contain Audio Set le
Information, the Audio Set is loaded (the [AUDIO KEY] button
ashes). See “How to Save and recall an Audio Key Set into a
Performance” (p. 71)
3. If you need to return to the previous page, press the
[EXIT] button.
To return to the page that lists the memories, press PERFORMANCE
[LIST] again.
Quickly Locating Performance
Memories
The BK-9 has two ways to quickly recall a performance.
Recall Performance Memories by
[NUMERIC] button
This function can be handy when you need to recall a performances in a
certain position.
Performance memories can also be loaded using the BK-9’s “Numeric”
function. See “Using the ‘Numeric’ function to Select Tones, Rhythms and
Performances” (p. 33) for details.
Recall Performance Memories by
[FAVORITE] button
This function can be handy when you need to recall performances in
adjacent positions.
1. Load a Performance/Music Assistant List (p. 57).
Right Display
In this example, we loaded the “Music Assistant” List.
2. Press the [FAVORITE] button. The button lights.
The TONE [1]~[8] buttons ash. The TONE [0] and [9] buttons light
steady to indicate that this buttons are used to scroll the page.
The Performance List page changes to:
Right Display
At the left of each performance eld a number is shown.
This number corresponds to the TONE buttons [1]~[8] that you have
to press to recall your desired performance.
3. Press the TONE button that corresponds to the
performance ([1]~[8]).
The corresponding performance is recalled and the display shows
it in reverse.
4. Press TONE button [9] to visualize the next set of eight
performances. Alternatively, press TONE button [0] to
visualize the previous set of eight performances
DOWN UP