Roland BK-9 - Fade IN;OUT Settings; Language; Save Global; Audio Key

Menu options
148
Right Display
The following table shows the Video Setting parameters.
Parameter Setting Explanation
Video Mode PAL, NTSC
Select the setting that corresponds to
the format
Aspect Ratio Full, Center
Specify the appropriate aspect ratio for
the screen you are using.
NOTE
If you work with a TV set, do not forget to select the correct
channel (“AV” or something to that eect, see the manual that
came with your set).
Fade IN/OUT Settings
These parameters can be selected using [MENU] button  “Global”
 “Fade IN/OUT Settings”.
Right Display
The following table shows the Fade IN/OUT Setting parameters.
Parameter Setting Explanation
Time IN 0~20 s
Use this parameter to change the Fade
In duration.
Time OUT 0~20 s
Use this parameter to change the Fade
Out duration.
Time HOLD 1~10 s
Use this parameter to set how long
it takes for the volume to return to
the master [VOLUME] setting after
completing the fade-out.
Language
This parameter allows you to choose the character set to be used
for the following:
• Lyrics display (for les that contain lyrics)
• “Search” functions. See”Using the ‘Search’ Function to Locate Songs
or Rhythms” (p. 50).
• “Rename” functions. See “Rename a Performance List” (p. 59).
Parameter Setting
Language Latin, Cyrillic, East Europe
Save Global
This function allows you to save all “Global” parameter settings to
ensure that they are loaded automatically each time you switch the
BK-9 on.
You can select this function using [MENU] button  “Global” 
“Save Global”.
Right Display
1. Rotate the dial to select “YES”, then push it to dene the
current settings as the default state.
The display shows a conrmation message.
If you don’t want to dene the current “Global” settings as the
default state, select “NO”. The BK-9 then returns to the “Global” page.
Audio Key
These parameters can be selected using [MENU] button  “Audio
Key”.
See “16. Using Audio Phrases (Audio Key)” (p. 65).
Edi
One Touch Edit
These parameters can be selected using [MENU] button  “One
Touch Edit”.
See “Programming Your Own ONE TOUCH Settings (One Touch
Edit)” (p. 42).
Chord Loop
The parameters discussed here can be selected using [MENU]
button  “Chord Loop” or pressing and holding the CHORD LOOP
[REC] button.
Right Display