Roland BK-9 - Using One of Your Own Pictures as Background; Picture Display and Song Lyrics; User Background and Slide Shows

Adding pictures to the music
74
Using one of your own pictures as
background
The BK-9 allows you to use one of your own pictures as screen
background, allowing you to customize your performances.
1. Connect the USB storage device that contains the picture
you want to use to the BK-9’s USB MEMORY port.
The display shows a list of the les on the USB storage device.
2. Select the .JPG le you want to use.
That picture now appears on the external screen (if connected).
This picture will be considered your “User” setting and the
“Background Mode” parameter (see p. 147) will be set to “User”.
3. To revert to the colored background or logo, you must
select it using the “Background Mode” parameter (see p.
147).
If you once again select a .JPG picture (see above), the “Background
Mode” parameter is again set to “User”.
‘User’ background and slide shows
Even after selecting a new background picture (“User”), you can still
take advantage of the BK-9’s slide show functionality.
If you select a song for which there is no picture folder on the
same le level as the song le, however, your “User” background is
displayed.
Picture display and song lyrics
If the rst words (Lyrics data) of the last song you played back
remain on the external screen while they are no longer needed,
switch o the “External Lyrics” function (see p. 127) to make them
disappear.