Roland BK-9 - 15 Performance Lists; Performance;Music Assistant;Factory Songs Info; Loading a Performance;Music Assistant;Factory Songs List; Recalling a Performance;Music Assistant;Factory Songs

57
15. Performance Lists
Performance/Music Assistant/
Factory Songs Info
The “Performance List” is a list of Performance memories. Each
Performance memory contains a reference to the desired rhythm or
song and all settings you want to load along with that rhythm or song,
including settings like INTRO/ENDING status, selected VARIATION, etc. See
“‘Performance Edit’ parameters” (p. 127).
The Performance memories you create are saved to the selected
“Performance List”. This allows you to prepare one set of Performance
memories for weddings, another for corporate events, a third for
anniversaries, etc. Performance Lists always reside on a USB memory.
It is perfectly possible to program several Performance memories for one
song. Selecting a Performance memory is a lot faster than calling up one of
the BK-9’s functions, modifying the settings, etc., while playing. You could
program one Performance memory for the rst part of a song, another for
the bridge and a third one for the closing section. Doing so allows you to
“play” with the eect settings of the various processors, for example.
NOTE
The BK-9 is supplied with one Performance List called “Music
Assistant” and a second called “Factory Songs” that contains 5
SMF les. These lists cannot be deleted or edited.
Loading a Performance/‘Music
Assistant’/‘Factory Songs’ List
1. Connect an optional USB memory to the BK-9.
NOTE
This step is unnecessary if you want to use the “Music Assistant”
or “Factory Songs” list, because these lists reside in the BK-9s
internal memory.
2. Press the PERFORMANCE [LIST] button.
If you have not loaded a Performance List yet:
The display now shows all Performance Lists it can nd in the USB
memory. (The internal “Music Assistant” and “Factory Songs” lists are
always displayed in the top line.)
Right Display
If you have already loaded a Performance List or Music Assistant:
The display immediately shows the Performance memories it
contains.
Right Display
To load a dierent Performance List from the USB memory, press
the PERFORMANCE [LIST] button again and proceed with step (3)
below.
MEMO
The PERFORMANCE [LIST] button alternates between the overall
list of Performance List les and the contents of the currently
selected list.
NOTE
If the USB memory contains no Performance List les, or if the
memory is not connected (properly), the BK-9 only displays the
“Music Assistant” and “Factory Songs” list.
3. Rotate the dial to select the Performance List you want to
use.
4. Push the dial to conrm your selection.
(In our example, we selected the “Music Assistant” list.) The display
changes to:
Right Display
You can now select a Performance memory (see below).
If you need to load another Performance List, press the
PERFORMANCE [LIST] button again.
Recalling a Performance/‘Music
Assistant’/‘Factory Songs’ memory
Here is how to select a Performance/ “Music Assistant”/ “Factory Songs”
memory from the last list you loaded.
1. If the display doesn’t yet show a list of Performance/“
Music Assistant”/“Factory Songs” memories, press the
PERFORMANCE [LIST] button.