Roland BK-9 - Modulation Assign

Menu options
142
Parameter Setting
Bender Ramge 0~24
Modulation Assign
This parameter allows you to specify how the Melody Intelligent”
should respond to Modulation messages (CC01).
Parameter Setting
Modulation Assign Auto, On, O
• “Auto” means that the “Melody Intelligent” part only responds to
Modulation messages if it is assigned to the right half (Split) or
the entire keyboard.
• “On” means that the “Melody Intelligent” part always responds
to Modulation messages, even if it is assigned to the left half of
the keyboard.
• “O” means that the “Melody Intelligent” part does not respond
to Modulation messages.
See “Using the ‘Melody Intell(igent)’ Function” (p. 52).
D Beam
See “Using the D-BEAM Controller” (p. 53).
MIDI Set Link
This parameter can be selected using [MENU] button 
“Performance Edit”  “MIDI Set Link”.
This parameter allows you to link a User MIDI Set to the
Performance memory.
There are eight User MIDI Set memories (User1~User8). For details
see “MIDI Parameters” (p. 151).
If you use the BK-9 in dierent MIDI environments (studio, live,
band), preparing a series of User MIDI Sets and linking them to the
Performance memories you usually use in the studio, on stage, etc.,
can be a time saver.
MEMO
If you do not want to load a User MIDI Set when you recall a
Performance memory, you can lter it using the “Performance
Hold” parameter. In this way the current MIDI Set remains as is.
See “Performance Hold” (p. 144).
Parameter Setting
MIDI Set Link O, User1~User8
Select the User MIDI Set (User1~User8) you want to link to the
Performance memory and then press the [WRITE] button to save
the Performance memory. For more details see “Saving your
Settings as a Performance” (p. 59).
Select “O” if you desire to break the link to the User MIDI Set. Save
the Performance memory.
Save As Default
This function allows you to save the current “Performance Edit”
settings as default settings. These settings are loaded each time you
switch on the BK-9.
This function can be selected using [MENU] button  “Performance
Edit”  “Save As Default”.
Right Display
1. Rotate the dial to select “YES”, then push the dial to dene
the current settings as the default state.
The display shows a conrmation message.
If you don’t want to dene the current settings as the default state,
rotate the dial to select “NO”, then push it.
The BK-9 then returns to the “Performance Edit” page.
‘Global’ parameters
The settings of the “Global” parameters can be saved to the BK-9s
global memory. If you don’t save them, your changes are lost when
you switch o the BK-9.
See “Save Global” (p. 148) for how to save these settings.
Right Display
Display Contrast
This parameter can be selected using [MENU] button  “Global” 
“Display Contrast”.
It is used to change the contrast of the BK-9’s display in case you
nd it dicult to read.
Parameter Setting
Display Contrast 1~10
Display Brightness
This parameter can be selected using [MENU] button  “Global” 
“Display Brightness”.
It is used to change the brightness of the BK-9’s display in case you
nd it dicult to read
Parameter Setting
Display Brightness 1~10