Roland BK-9 - Page 77

Recording your Performance as MIDI Data
77
NOTE
If you pressed the [SONG REC] button by accident, press and
hold it until its indicator goes dark again.
6. Press the [START/STOP] / [ */, ]button.
The indicators of the [SONG REC] and [START/STOP] buttons light
and the BK-9 starts playing back the selected rhythm and recording.
Everything you play on the keyboard is recorded.
The Main page shows the recording measure is running:
7. At the end of the song recording, press the [SONG REC] or
[START/STOP] / [ */, ] button to stop recording.
Rhythm playback and recording stop.
The following page appears:
Left Display
8. Rotate the dial to select “YES” to save your song in the USB
memory.
Otherwise, select “NO” to return to the main page.
This will take you to the following display page:
Right Display
9. Use the dial to select the folder where you want to save.
To return to a lower hierarchical level, you can press the [EXIT]
button.
10. Press the [WRITE] button.
The BK-9 suggests the name “new_song”.
Right Display
11. Use the dial and the TONE [0]~[9] buttons to enter the
desired name. See “How to type a name in BK-9” (p. 27).
12. Press the [WRITE] button to conrm your desire to save
the song.
The display briey conrms the operation and then returns to the
main page.
If the USB memory already contains a song le of the specied
name, you will be asked whether you want to overwrite it:
Right Display
In this case, select “YES” using the dial to replace the old le with the
new one (the old le will be lost). Otherwise, select “NO”.