Roland JD-XA - CC Assignments; Analog Part

68
A-OSC1 [Pitch] knob
CC19 (OSC1 Pitch)
A-OSC1 [Fine] knob
CC22 (OSC1 Fine)
A-OSC1 [PWM] slider
NRPN MSB: 0, LSB: 31 (OSC1 PWM Depth)
A-OSC1 [PW] slider
NRPN MSB: 0, LSB: 28 (OSC1 PW)
A-OSC1 [Cross Mod] knob
CC25 (Cross Mod)
CC Assignments
[Portamento Time] knob
CC05 (Porta Time)
LFO [Rate] knob
LFO1: CC16 (LFO1 Rate)
LFO2: CC17 (LFO2 Rate)
LFO [Fade Time] slider
LFO1: NRPN MSB: 0, LSB: 6 (LFO1 Fade Time)
LFO2: NRPN MSB: 0, LSB: 7 (LFO2 Fade Time)
LFO [Pitch Depth] slider
LFO1: NRPN MSB: 0, LSB: 9 (LFO1 Pitch Depth)
LFO2: NRPN MSB: 0, LSB: 10 (LFO2 Pitch Depth)
LFO [Filter Depth] slider
LFO1: NRPN MSB: 0, LSB: 12 (LFO1 Filter Depth)
LFO2: NRPN MSB: 0, LSB: 13 (LFO2 Filter Depth)
LFO [Amp Depth] slider
LFO1: NRPN MSB: 0, LSB: 15 (LFO1 Amp Depth)
LFO2: NRPN MSB: 0, LSB: 16 (LFO2 Amp Depth)
A-OSC2 [Pitch] knob
CC20 (OSC2 Pitch)
A-OSC2 [Fine] knob
CC23 (OSC2 Fine)
A-OSC2 [PWM] slider
NRPN MSB: 0, LSB: 32 (OSC2 PWM Depth)
A-OSC2 [PW] slider
NRPN MSB: 0, LSB: 29 (OSC2 PW)
Analog Part
The MIDI messages corresponding to each controller are shown below.
Even for the same controller, the MIDI channel that is output will change depending on the part that you select.
The MIDI messages that are output will also change depending on the LFO1/2 and PITCH ENV1/2 selection.
PITCH ENV [Depth] knob
Pitch Env1: CC26 (O1 PITCH ENV Depth)
Pitch Env2: CC27 (O2 PITCH ENV Depth)
[Shift]+ PITCH ENV [Depth] knob
Pitch Env1: NRPN MSB: 0, LSB: 37 (O1 PITCH ENV Velo Sens)
Pitch Env2: NRPN MSB: 0, LSB: 38 (O2 PITCH ENV Velo Sens)
PITCH ENV [A] slider
Pitch Env1: NRPN MSB: 0, LSB: 43 (O1 PITCH ENV Attack)
Pitch Env2: NRPN MSB: 0, LSB: 44 (O2 PITCH ENV Attack)
PITCH ENV [D] slider
Pitch Env1: NRPN MSB: 0, LSB: 46 (O1 PITCH ENV Decay)
Pitch Env2: NRPN MSB: 0, LSB: 47 (O2 PITCH ENV Decay)