Chapter 5 Feature Reference
5-4 Changing How the Printer Operates
103
Chapter 5 Feature Reference
Press .
Press
to go back to the original screen.
Description
This lets you change, according to your purpose, the operation that takes place when an ink cartridge
is empty.
"STOP" immediately pauses operation when a cartridge becomes empty. Because pausing printing in
progress may make colors uneven, it is best to ensure a sucient amount of remaining ink before you
begin printing.
"CONT." (continue) is a mode in which operation is not automatically stopped. When a cartridge be-
comes empty, a warning beep sounds but printing doesn't stop. To replace the cartridge, you must
either wait until printing ends or press
to pause printing. Note that operation does not stop
even if ink runs out completely.
Default Setting
[EMPTY MODE]: STOP
Setting the Interval until Activation of the Sleep Mode
Procedure
Press .
Press
several times.
Press .
Press
several times.
Press twice.
Use
to make the setting.
Press
to enable the setting.
Press .
Press
to go back to the original screen.
Default Setting
[INTERVAL]: 30min
To Next Page
Loading...
Need help?
General