Performing Feed Correction to Alleviate Horizontal Bands and the Like
Procedure
1.
Print a test pattern.
Press .
Press
several times.
Press .
Press
to start printing.
2.
Read the correction values from the test pattern.
In the printing example shown below, "-0.40" becomes the correction value.
3.
Enter the correction values that you read.
Press .
Press
.
Use
to make the setting for the cor-
rection value.
Press
to enable the setting.
4.
Go back to the original screen.
Press .
Press
to go back to the original screen.
To Next Page
Loading...
Need help?
General