Press .
Press .
Use
to select. Use to
set the correction value.
Press
to nish making the settings for [SET-
TING NO.2].
Press .
Press .
Use
to select. Use to
set the correction value.
Press
to nish making the settings for [SET-
TING NO.3].
Press .
Press .
Use
to select. Use to
set the correction value.
Press
to nish making the settings for [SET-
TING NO.4].
4.
Go back to the original screen.
Press .
Press
to go back to the original screen.
Description
This corrects, for each head, the minute misalignment that occurs in the bidirectional-printing mode.
When further correction is required, such as when adjustment made using [SIMPLE SETTING] does not
enhance printing, use [DETAIL SETTING] to make corrections for each head.
To Next Page
Loading...
Need help?
General