4-7 When Moving the Unit
Procedures from Preparing to Move Through Reinstalling
To move the machine, you must completely drain all ink inside the machine and secure the print heads
in place with packing materials to protect them. Attempting to move the machine without rst doing
this may result in damage to internal components due to leaking ink or damage to the heads.
This operation requires four unused SOL INK cleaning cartridges. Have these on hand before you
start.
For information on how to remove and attach the various items, refer to the Setup Guide.
Important Notes on Moving
Be sure to use SOL INK cleaning cartridges. Use of any other type may result in
breakdown.
Once the preparations for moving are complete, move the machine and ll it with
ink with as little delay as possible. Allowing the machine to stand without ink may
damage the print heads.
When moving the machine, keep it at a temperature between 5 to 40˚C (41 to 104˚F)
and at relative humidity between 20 to 80% (with no condensation). Failure to do so
may result in breakdown.
Handle the machine with care when moving, keeping it level (not tilted at an angle)
and preventing it from striking other objects.
1.
Drain the ink and wash the interior.
Press .
Press
several times.
Press .
Press
twice.
Press .
Press
twice.
Press .
Make sure the cleaning uid is ready.
Press .
Discard the discharged ink in the drain bottle.
Be sure to discard the discharged ink.
Press .
Thereafter, follow the on-screen instructions to carry out the operations.
After cleaning has nished, the sub power is automatically switched o.
P. 64, "Disposing of Discharged Ink," p. 141, "Draining Ink and Performing Internal Washing"
To Next Page
Loading...
Need help?
General