5-2 Setting the Print-start Position
92
Chapter 5 Feature Reference Chapter 5 Feature Reference
possible width at the position.
This feature is also available when you're printing or cutting various test patterns, and can help you
use media with less waste. Note, however, that the left and right positions are not restored to their
defaults for test patterns.
Also, never use
in the following cases.
When you're using the media take-up system
The media take-up system may pull the media with undue force, resulting in an error or malfunc-
tion.
Before or after executing feed correction
Slackness in the roll media can make it impossible to obtain reliable correction results. Also, slack-
ness in the roll media after feed correction may cause slippage in the media's movement distance
during printing, resulting in horizontal stripes.
P. 111, "Performing Feed Correction to Alleviate Horizontal Bands and the Like"
To Next Page
Loading...
Need help?
General