Controller functions
Page 36 RES-445
108 Autocomp Pressing the "ENTER" key starts the "AUTOCOMP"
function. If the "ENTER" key is not pressed within
2s, the display returns to the home position.
The home position is automatically displayed if the
"AUTOCAL" function is successfully executed and
"AUTOCOMP" is active.
201
[20]
Language The desired display language can be selected with
this menu step.
English
German
Italian
Software revision 015 or
higher also:
French, Spanish, Dutch,
Danish, Finnish, Swedish,
Greek, Turkish.
Software revision 024 or
higher also: Portuguese.
202
[21]
Factory settings The controller can be reset to the factory settings by
pressing the "ENTER" key ( section 11 "Factory
settings" on page 65).
In addition, as of software revision 100:
The "UP" and "DOWN" keys can be used to select
whether
• The controller should be reset to the ROPEX fac-
tory settings
• The current configuration should be specified as
the default setting
• The controller should be reset to a previously
specified default setting
No. Name Description Setting range
To Next Page
Loading...
