Roundshot VR Drive - Page 44

23/05/2019Roundshot VR Drive Instruction Manual – Firmware Version 2.023 43
2.4 Navigation (continued)
x/y-
resume
Click on “x/y-resume” to restart a program by selecting a starting point (row +
position).
This displays the rows of the active program (ie the last program which was
executed. Select the relevant row (elevation):
repeat position
elev. : 66
images : 30
elev. : 55
images : 30
position repeat
[1…10] [0…0]
For this row, select the position from which the
program should resume.
Press “start”.
The VR Drive will now restart the program from the
selected position.
When using “repeat” and/or “resume” with USB feature “Write IDs”, the Image
Bundler will recognise the repeated/duplicated images and will use these images to
replace previous images released from the same position.
rows / page 1
elev. : 66
pos. : 30
elev. : 55
pos : 30
elev. : 44
pos : 30
elev. : 33
pos : 30
elev. : 22
pos : 30
elev. : 11
Pos : 30
Select the relevant row
(elevation), for example:
elev. : 66
pos : 30